LaCie 2big Network
User Manual
page
Setup
2.1. Turning the Drive On
The power supply kit is composed of two cables: one
cable (
A
) connects to the LaCie drive; and the other
cable (
B
) connects to a power outlet, such as a wall out-
let or a surge protector.
Connect Cable
A
to your LaCie Drive.
Connect Cable
B
to the power supply brick (
C
).
Connect Cable
B
to a surge protector or wall outlet.
Turn on the drive by moving the power switch on the
back of the drive to the “On” position (
D
).
1.
2.
3.
4.
CAUTION:
Only use the AC adapter supplied with your specific LaCie drive. Do not use a power supply from
another LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to
the device and void your warranty.
Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in
damage to your drive and will void your warranty.
TeChNICAl NOTe:
You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power
supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no
responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other
than one authorized by LaCie will void your warranty.
safe 100
big
off auto on
C
Fig. 2.1
B
