LaCie 2big Network
User Manual
page 0
Setup
In the case that your server is not DHCP-enabled,
you will need to manually assign the correct network
settings for your LaCie 2big Network.
2.5. Configuring the 2big Network on a LAN Without a DHCP Server
Fig. 2.5.1-a
2.5.1. Configure with LaCie Ethernet Agent (Windows)
■
The easiest way to modify your LaCie 2big Net-
work’s network configuration on a PC is to use the
LaCie Ethernet Agent. See section
2.3, Connecting
with LaCie Ethernet Agent
for information on install-
ing the network configuration software.
Start LaCie Ethernet Agent (see section
2.3, Con-
necting with LaCie Ethernet Agent
).
Click on the Ethernet Agent icon in the system
tray and select
Advanced > Configuration
(Fig.
2.5.1-A). The Ethernet Agent Configuration win-
dow (Fig. 2.5.1-B) opens.
Uncheck the “DHCP” box.
Modify the network settings to work with your net-
work.
Click
Apply
.
1.
2.
3.
4.
5.
Fig. 2.5.1-B
