LaCie LaCinema Black MAX
Setting Up the LaCinema Black MAX
User Manual
page 17
3.1.3. Component & Analog Stereo Audio
(High Definition) Connection
IMPORTANT INFO:
Before connecting the cables, power off
your TV.
1. Connect one end of the component (red, green, and blue)
video cable to the component ports on your TV. For Audio
output, connect the stereo audio cable (with red and white
ends) to the stereo audio port on your TV. The stereo audio
connectors you should use are usually located close to the
TV’s component ports.
2. Connect the other end of the component connectors to the
five RCA ports (red, green, blue, white, and red connec tors)
on the back of the LaCinema Black MAX.
3. If you choose to use this connection method you will have to
change the Component mode using the remote control. After
turning on the television (see section
3.4
for details), press
the
Options/Settings
button to navigate to the
Settings
Space
, and set the Component mode to YUV in the Video or
Photo section.
Move on to the next step,
3.2
.
Fig. 07 - Component cable ends
To the LaCinema Black MAX
To the TV
Fig. 08
