LaCie 2big Network 2
• DESIGN BY NEIL POULTON
Accessing & Transferring Files
User Manual
page 28
3.4.2. STEP 2: Turn On the Drive
1. Connect the power supply to a wall outlet and to the LaCie 2big
Network 2 (
Fig. 28
).
2. Turn on the drive by pressing the power button on the back
of the drive (
Fig. 29
) until the LED turns on. It will then begin
blinking.
3. Once the LED stops blinking, the hard disk will mount on your
computer and appear in My Computer/Computer (Windows us-
ers) or on your desktop (Mac users).
4. Transfer files from your computer normally.
CAUTION:
Only use the AC adapter supplied with your specific La-
Cie device. Do not use a power supply from another LaCie device or
another manufacturer. Using any other power cable or power supply
may cause damage to the device and void your warranty. Always
remove the AC adapter before transporting your LaCie drive. Failure
to remove the adapter may result in damage to your drive and will
void your warranty.
TECHNICAL NOTE:
You may use your LaCie drive when in a for-
eign country thanks to its 100-240 Volt power supply. To use this
feature, you may need to purchase an appropriate adapter or cord.
LaCie accepts no responsibility for any damage to the drive resulting
from the use of an inappropriate adapter. Using an adapter other
than one authorized by LaCie will void your warranty.
Fig. 28
Fig. 29
