LaCinema Classic Bridge
Setting Up the LaCinema Classic Bridge
User Manual
page 14
3.1.1. Option A: Connect an External USB
Hard Drive
IMPORTANT NOTE:
The LaCinema Classic Bridge is compat-
ible only with disks formatted in FAT32. If you attempt to install a
disk formatted in NTFS or HFS+, files will not be available when
the drive is connected to the television. Refer to section
5. Refor-
matting the LaCinema Classic Bridge
for formatting information.
The FAT32 file system is compatible with almost all computers but
file size is limited to 4GB and partition size of more than 32GB is
not properly supported. Windows users should use the Formatter
Utility included on the CD-ROM, which will allow them to format
their drive in one large FAT32 partition.
1. Connect your USB hard drive’s power cord (if applicable) and
turn it on (if applicable).
2. Connect the USB cable from the USB hard drive to the USB
port on the front of the LaCinema Classic Bridge (
Fig. 08
).
Proceed to section
3.2. Step 2: Transfer Files to the Hard Drive
.
Fig. 08