LaCinema Classic Bridge
Setting Up the LaCinema Classic Bridge
User Manual
page 16
3.2. Step 2: Transfer Files to the
Hard Drive
1. Make sure that you have either connected an external USB
hard drive or installed an internal hard drive as outlined in
section
3.1. Step 1: Installing a Hard Drive
.
2. Connect the power supply which powers on the LaCinema
Classic Bridge.
3. Connect the USB cable form the LaCinema Classic Bridge to
your computer.
✦
See
Fig. 13
if you installed an internal hard drive.
✦
See
Fig. 14
if you connected an external USB hard drive.
4. Access the drive in
My Computer
(Windows users) or from the
Desktop
(Mac users). Create folders on the mounted volume
in which to place your media (MOVIES, MUSIC, PICTURES,
and UPDATE) (see
Fig. 15
). The names must be exact.
IMPORTANT INFO:
You must correctly categorize your files
(i.e., music in the Music folder) or they will not be properly clas-
sified on your TV.
TECHNICAL NOTE:
Windows users only: If you use the For-
matter Utility (located on the CD-ROM) to reformat your ex-
ternal hard drive to FAT32, it will create the folders for you.
5. Copy your multimedia files by adding your music, photos,
and videos by simply dragging and dropping to the appropri-
ate folders.
6. Unmount the volume and disconnect the USB cable from
your computer.
TECHNICAL NOTE:
It is also possible to transfer files to an exter-
nal hard drive before connecting it to the LaCinema Classic Bridge
(see
Fig. 16
).
Fig. 13
Fig. 14
Fig. 15
Fig. 16
