Setup
1. Connect the power supply.
2. Connect the Ethernet cable to the 5big and to your network through an Ethernet
outlet or directly to a router, switch or hub.
3. Turn on the 5big by moving the power switch on the back to the
ON
position.
NOTE:
Please allow approximately 3 minutes for the 5big to start up and
become available on the network (the front LED will stop blinking).
designed by neil poulton
Summary of Contents for 5big - Network NAS Server
Page 1: ...5big network Gigabit Ethernet 5 bay RAID Quick Install Guide Design by Neil Poulton...
Page 22: ......
Page 23: ......
