USB FDD Installation Guide Rev. B
Page 20
Feb. 2002
9.
9.
9.
9. Windows
Windows
Windows
Windows CE
CE
CE
CE
9.1.
9.1.
9.1.
9.1. Installing with the Windows CE Service
Installing with the Windows CE Service
Installing with the Windows CE Service
Installing with the Windows CE Service
When using the USB FDD with a Handheld PC, the driver software needs to be installed
before connecting the USB FDD. Do not connect the USB FDD to your Handheld PC
until you have installed the USB FDD driver software.
Lots of Handheld PCs have a pre-installed USB FDD driver. In this case, it is not
necessary to install a driver software.
To check whether a driver for USB FDD is installed or not, please refer to your Handheld
PC manual
If the driver is not pre-installed, a following message is displayed on the screen when
connecting a USB FDD to Handheld PC. So, please click X button and install the driver.
For the installation of a driver, we have 2 methods as follows.
The way to connect a Handheld PC to a host Windows PC with the Windows CE
Service software and a cable.
The way to download a driver software via an Internet connection by dial-up from
Handheld PC.
The procedure below describes how to install the USB FDD drivers on your Handheld
PC from a Host Windows PC. To do this, you will need to connect your Handheld PC to
the Host Windows PC with the Windows CE service software and a cable. Please refer to
your Handheld PC manual about how to connect your handheld to the host.
1) Establish a partnership to transfer files from the Host Windows PC to your
Handheld PC.
2) Insert the USB FDD driver CD-ROM in the CD-ROM drive of the Host Windows PC.
