12. When verification/read has finished, the Dupli 125 will beep repeatedly to show the
process has been successful and the following screen will display:
13. Open the front door (if necessary) and press the
Yes
button. The CD-RW drives will eject
the target discs.
When the process is complete, the unit will automatically return to the
Copy Start
menu.
4.2.4 Copying a master CD to target CDs + changing the write speed.
1. Follow steps 1 through 9 in section 4.2.2: Copying a master CD to target CDs with Verify
and Read Check options (above) to select the type of duplication you wish to carry out (either
Copy, Copy+V or Copy+R). You should be at the
Copy Start
screen for the duplication
function you have selected:
2. Press the
Yes
button 3 times to access the
Setup
screen
3. Press the
Yes
button once to access the
Mode Select
screen
4. Press the
No
button once to access the
Write Speed
screen
5. Press the
Yes
button once. The following screen will be displayed:
This is the
Fast
screen of the
Write Speed
menu. This is one of four choices of the
Write
Speed
menu. To view the other options, press the
No
button.
They will be displayed in the following order: FAST , MEDIUM , SLOW.
By pressing the Esc button from the Fast, Medium, Slow or Exit screens,
you will return to the Write Speed screen.
6. From the LCD screen for the speed you wish to choose (
Fast
,
Medium
or
Slow
), press
the
Yes
button to validate your choice.
PROCESS COMPLETE
EJECT: PRESS YES
>> FAST ?
i
Summary of Contents for Dupli 125
Page 1: ...LaCie Dupli 125 User s Manual ...
Page 50: ...NOTES ...
