Setup Steps
1. Turn off your computer and all connected peripherals.
2. Disconnect your computer from all power sources.
3. Open the computer’s case. Refer to your computer’s User Manual for
more details.
4. Find an available PCI Express Slot and remove the slot bracket. Save the
bracket screw for later use. (A)
5. Align the card with the PCI Express Slot and insert it into the slot
firmly and evenly. Be careful not to force it into the slot. Once you have
properly positioned the card into the slot, fasten it to the computer case with
the bracket screw. (B)
6. Replace the computer case and switch on your computer.
For Mac Users
: The LaCie FireWire 800 PCI Express Card is plug & play and does
not require driver installation.
For PC Users
: There are no drivers to install for Windows XP, Windows Vista, and
Windows 7. The LaCie FireWire 800 PCI Express Card has the drivers built into the
BIOS for these operating systems.
