Setting Up Your LaCie Big Disk
page 14
LaCie Big Disk User’s Manual
more information.
3.2.2.2. Mac OS 9.x
To use your new LaCie Big Disk, first install the necessary driver software.
Silverlining Pro Installation
1) Insert the LaCie Storage Utilities CD in your computer’s internal CD/DVD drive.
2) Open the CD icon and double-click on
LaCie Installer
.
3) The Silverlining Utilities screen appears. Click on
Continue
.
4) The
About to Install
screen appears. Read the following information and click on
Continue
.
5) The
License Agreement
screen appears. Click on
Agree
.
6) The
Installation
screen appears.
7) Check the
Silverlining Pro
and
FireWire Support
boxes.
8) Click on
Install
.
9) A message appears to confirm that the installation was successful.
10) Click on
Restart
to use your FireWire peripheral immediately.
Hardware Installation
1) After following the steps in
3.1. Connecting The Power Supply
, power on the drive by pressing the On/Off button on the
front of the drive.
2) Connect the 9-pin end of the FireWire bilingual cable into the FireWire 800 port on the back of the LaCie Big Disk.
3) Connect the 6-pin end of the FireWire bilingual cable into an available FireWire 400 port on your computer.
4) Your LaCie Big Disk will now be ready for use. You can then use the formatting and partitioning capabilities in
Silverlining
Pro
to configure your hard drive system. Please refer to the
Silverlining Pro
documentation on the LaCie Storage Utilities CD-
ROM for more information.
BigDiskFW800_UG_030311_4.0 3/11/03 4:48 PM Page 14