LaCinema Classic HD
Setting Up: Connecting to TV
User Manual
page 23
4.2. STEP 2: Connect the Ethernet
Cable
1. Connect the Ethernet cable to the Ethernet port on the back of
the LaCinema Classic HD (
Fig. 25
).
2. Connect the other end of the Ethernet cable into an available
Ethernet LAN (local area network) port on your router or hub
(refer to your router or hub’s documentation if necessary). Allow
a few moments for your network to recognize the drive.
Now move on to the next step,
4.3. STEP 3: Connect the Power
Supply
.
NOTE:
You can purchase a WiFi dongle from LaCie that will enable
your LaCinema Classic HD to connect to the network wirelessly. For
more information, refer to the LaCie website:
www.lacie.com
.
Fig. 25