LaCinema HD Connect
Setting Up: Connecting to TV
User Manual
page 17
3. Setting Up: Connecting to TV & Network
This chapter explains how to connect your LaCinema HD Connect to
your television and network. If you would also like to connect a USB
hard drive in order to play its files on the TV, see section
4. Setting
Up: Connecting USB Hard Drive
.
This section consists of these steps:
3.1. STEP 1: Connect HDMI or Composite Cables
3.2. STEP 2: Connect to the Network
3.3. STEP 3: Connect the Power Supply
3.4. STEP 4: Complete the Installation Wizard
3.1. STEP 1: Connect HDMI or
Composite Cables
The LaCinema HD Connect supports different ways of connecting
to televisions. From the following methods, choose the setup that
matches the ports on your television or receiver:
■
HDMI (section
3.1.1. HDMI (High-Definition) Connection
)
■
Composite (section
3.1.2. Composite Video & Stereo Audio
Connection
)
In each of the above connection methods, it is possible to connect
the LaCinema HD Connect to home theater systems by plugging the
S/PDIF cable (not included) to your digital amplifier via the digital
optical audio connector (see section
3.1.3. Optical Audio (S/PDIF)
Connection
for details. The chart at right illustrates the qualities
made possible by the different connection methods.
continued on the next page >>
Connection
Maximum
Resolution
High
Definition
HDMI
1080p
Standard
Definition
Composite
576p
TECHNICAL NOTE:
The connectors on the rear of your TV may
not appear exactly as shown in the following pages. Please read the
labels next to the connectors carefully to ensure correct connections.
Composite
Router
Power
Ethernet
Fig. 14