LaCie Skwarim
Getting Connected
User Manual
page 6
2.1. Windows 98 SE and Windows
Me Users Only: Silverlining 98
and USB 2.0 Driver Installation
To use your new LaCie drive, first install the necessary driver software
and then Silverlining 98. Follow the steps below to install the neces
sary drivers and software to configure your drive. Then move on to
the USB 2.0 installation steps.
Step 1)
Insert the
LaCie Storage Utilities
CDROM in your com
puter’s internal CD/DVD drive and open the disc (
Fig. 01
).
1. Doubleclick the
USB 2.0 Drivers Install
folder.
2. Doubleclick on the
LaCie_USB_Driver_Install.exe
icon.
The
LaCie USB2 Storage Driver
screen will appear. Click
on Next.
3. Installation will finish automatically.
Step 2)
Reopen the
LaCie Storage Utilities
CDROM.
1. Doubleclick the
Silverlining 98
folder.
2. Doubleclick the
Silverlining98_Install.EXE
icon.
3. Silverlining 98 will then initialize the install screen. The “Wel
come” screen will appear. Click
Next
.
4. The “Destination Location” screen will appear. To alter the
location where the software is installed on your system, click
the
Browse
button. If you do not want to change the location,
do not click on the Browse button, and allow the software to
be installed in its default location. Click
Next
to continue.
5. Next is the “Start Installation” screen. Click
Next
.
6. The software installation will begin, and you will see the instal
lation screens.
7. Finally, you will see the “Silverlining 98 has been installed cor
rectly” screen. Click
Finish
to complete the installation.
Fig. 01
Step 1
Step 2