LaCie Skwarim
Getting Connected
User Manual
page 8
2.3. Connect the Integrated USB 2.0*
Cable to Your Computer
Unfold and connect the integrated HiSpeed USB 2.0 cable to your
computer (
Fig. 03
). After a few seconds, your LaCie drive will mount
on your computer. You also may use the included USB extension
cable by connecting the integrated USB 2.0 cable to it and then
connecting the extension cable to your computer.
Proceed to section
2.4. Launching LaCie Setup Assistant
.
TECHNICAL NOTE:
The LaCie SKWARIM is plug & play for Win
dows 2000, Windows XP and Mac OS X. Windows 98SE and Win
dows Me users should install the included driver software and Silver
lining 98.
TECHNICAL NOTE:
Please refer to section
4.1. Advice For Optimiz-
ing USB 2.0 Connections
for important information on disconnecting
USB 2.0 devices and ensuring optimum performance.
* To achieve USB 2.0 speeds, your drive must be connected to a USB 2.0
host port. If it is connected to a USB 1.1 port, your drive will operate at USB
1.1 speeds. For more details, see 4.1 Advice for Optimizing USB 2.0 Con
nections.
Fig. 03