background image

Unpacking Information 

 
Thank you for purchasing this product. Before installation, please 
verify that your package contains the following items. 

 

1.

 

One 16/24-Port Gigabit Ethernet Switch with 4-Port Mini-GBIC   

2.

 

One AC power cord 

3.

 

Rack-mount brackets (optional) 

4.

 

User’s Manual 

 

Introduction  

 

General Description 

 

Easily boost your networking throughput; the product equips 

16/24 Gigabit ports that lead you to a real Gigabit connection. 
Users are now able to transfer large and high bandwidth-needed 
files faster and hence get a real efficiency improvement. In 
addition to the copper ports, 4 of the ports supports fiber 
connection with the equipped Mini-GBIC ports for obtaining 
long-distance communication. 

 

This product offers users with fast and reliable network. The 

store-and-forward architecture filters errors and forwards packets 
in a non-blocking environment. Flow control prevent data loss 
while transmitting. The 802.3x and backpressure flow control 
mechanisms work respectively for full and half duplex modes. 

 

The switch features with easy installation and maintenance. It 

supports Nway auto-negotiation protocol that detects the 
networking speed (10/100/1000 Mbps) and the duplex modes 
(Full/Half) automatically. Auto-MDI/MDI-X function alleviates the 
effort to use crossover cables. Also, rich diagnostic LEDs are 
provided for users to get real-time information of the connection 
status. 

Key Features 

 

z

 

Complies with IEEE802.3, IEEE 802.3u, IEEE 802.3ab and 
IEEE 802.3z standards. 

z

 

16/24 * 10/100/1000 Mbps RJ-45 Nway ports 

z

 

4* Mini-GBIC port for optional fiber optical communication 

z

 

Supports NWay protocol for speed (10/100/1000Mbps) 
and duplex mode (Half/Full) auto-detection 

z

 

Supports MDI/MDI-X auto crossover 

z

 

Supports full and half duplex operation on all copper ports 

z

 

Supports back-pressure (half duplex) and flow control 
(IEEE 802.3x) 

z

 

Wire-speed packet filtering and forwarding rate 

Summary of Contents for L-EX1616G4M









Reviews: