33
Warranty Information
This manual provides the installation, safety and operating instructions for the thermoelectric wine
cooler. We recommend all installation, operating and safety instructions appearing in this manual
to be read before installation or operation.
Thermoelectric wine cooler is a product of extensive research and field testing. The materials used
were
selected for maximum durability, attractive appearance and optimum performance. Every
unit is thoroughly inspected and tested before shipment.
1.- Plug thermoelectric wine cooler into a properly grounded
electrical outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do not match, contact
a qualified electrician to determine the proper voltage and
size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at
a reasonable distance from combustible walls and materials.
4.- Allow a minimum of 1" (2 cm) clearance along the sides. Allow
a clearance of 20" (50 cm) along the front and rear discharge
to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power
cord.
SPECIFICATION
IMPORTANT!
Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
WARNING
!
CAUTIONS
!
1.- Locate the unit at the proper counter height, in an area that is
convenient for use. The location should be level to prevent
the unit or its contents from accidentally falling, and strong
enough to support the weight of the unit.
