74
7.- Do not place food processor in an area that restrict air flow
around the front or rear of the unit.
8.- Some exterior surfaces on the unit will get hot. Use caution
when touching these areas to avoid injury.
UNPACKING
1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts.
2.- Remove all accessories and book instructions.
3.- Place the device on a hard surface, flat and level.
4.- Please make sure that you clean all parts that come into contact with food with
soapy water, and then dry.
INSTALLATION
MAIN FUNCTION
Food processor with multiple functions including cutting, mixing, kneading, slow cooking, boiling,
steaming, baking, weighing, etc.
INSERTING THE BLADES
1.- With the lid removed, place the work bowl vertically on a table.
2.- Pick up the blades from the shaft and insert them through the hole making sure the silicon seal
makes contact with the stainless steel surface (figure 1-2).
3.- Secure the blades by turning the locking lever clockwise (figure 3).
4.- To remove the blades, follow the same procedure in reverse.
1
2
3
4
