CE User Manual
LACROS 1.9 EN
12
Additional display options
By pressing the ''
SET
'' button sequentially, you can browse through various information at the bottom of the
display: total km/miles mode (ODO), trip reading (TRIP), and cycling time (TIME).
Reset trip reading
Press and hold the "
SET
" key (B) for a few seconds until another
menu appears. Then press the "
–
" key (D) once. The trip mode has
now been reset. Press the "
SET
" button (B) again to return to the
default menu.
USB port
Below the display, you will find a USB port (A) where, for example, a
phone or navigation device could be charged during cycling. Charging
only works when you press and hold the ''
SET
'' key and the ''
+
'' key
for two seconds. This will activate the USB port.
The operation of the electrical support
The bicycle functions generally on PAS (pedal assistance) utilizing a magnet-rotation sensor. This means
that the electrical assistance starts when the pedals rotate. In addition, a thumb lever is located on the
handlebar, which can activate the maximum assistance, apart from assistance levels 1 to 9. As long as
the thumb lever has a forward position (during pedal rotation), the motor will give the maximum
assistance, comparable with assistance level 9 on the display.
Support is interrupted when:
-
The pedals stop rotating;
-
the brakes are being used;
-
the thumb lever is released when in use.
