CE User Manual
LACROS 1.9 EN
16
Speed unit
There are two possible settings for the speed unit, km/h or mile/h. If the setting changes, the values are
automatically adjusted. You can adjust the speed unit in the following way (the bicycle must be stationary):
1.
Press and hold the "
Settings
" button for longer than 1.5 seconds.
2.
In the settings mode, you can press the "
+
" or the "
–
" button to select the "
speed unit
."
3.
Then the "
Settings
" button should be pressed to confirm the desired flashing symbol.
4.
The value can be adjusted with the "+" or "
–
" key.
5.
By pressing the "
Settings
" button, the change will be saved.
6.
After the adjustment, you can exit the settings mode by pressing and holding the "
Settings
" button
for more than 1.5 seconds.
Reset trip reading
The trip distance can be deleted, but the
total mileage
cannot be erased.
This operation works as follows:
1.
Press and hold the "
Settings
" button for longer than 1.5 seconds.
2.
In the setting mode, you can press the "
+
" or the "
–
" button to select the "
trip mode
."
3.
Then press the "
Settings
" button to confirm the desired flashing symbol.
4.
The trip distance will be deleted by holding the "
–
" key for more than 1.5 seconds (this action is irreversible).
5.
By pressing the "
Settings
" button, the change will be saved.
6.
After the adjustment, you can exit the settings mode by
pressing and holding the "
Settings
" button for more
than 1.5 seconds.
