CE User Manual
LACROS 1.9 EN
8
Control system front and rear hub motor
SM100 Display
Turn on the display
Press the "
S
" or " " button (A) on the left side of the display to
switch on the bicycle's electrical circuit. Note that the battery
should already be powered on. A menu appears on the display;
the electrical circuit is switched on.
(A)
On/off button display
(B)
Increase motor support and lighting
(C)
Decrease motor support
Turn bicycle lights on and off
Hold the "
+
" button (B) for a few seconds to turn on the
bicycle lights. The lighting sign appears on the display. Hold
the ''
+
'' button (B) again for a few seconds to turn off the
bicycle lights.
Thumb lever walking assist
The walking assist is activated by pushing the thumb lever (A)
forward at a standstill, providing support up to 6 km per hour.
(Note: the walking assist via the thumb lever does not work
when the bicycle is in support level "0".) The walking assist will
also be activated when the "
–
" button on the display is
pressed for a few seconds
.
Note
: when using the thumb lever while cycling, the electrical
support goes directly to its maximum (25km/h).
Switch between the 9 levels of support
The electrical support has 9 levels. These are displayed at the top
left of the display. These 9 levels can be operated by briefly
pressing the "
+
" (B) and "
–
" (C) buttons.