CE User Manual
LACROS 1.9 EN
9
Additional display options
By pressing the ''
S
'' or " " button sequentially, you can browse
through various information at the bottom of the display:
(A)
Battery voltage (BATTERY)
(B)
Total km/miles (ODO)
(C)
Trip reading (TRIP)
(D)
Cycling time (TIME)
(E)
Maximum speed (MAX)
Please note:
Trip, Time, and Maximum speed will be
reset by pressing and holding the ''
S
'' key and the ''
–
'' key together
for two seconds.
USB port
Below the display, you will find a USB port (A) where, for
example, a phone or navigation device could be charged during
cycling. Charging only works when the display is turned on.
BS200 Display
Turn on the display
Press the "
M
" button (A) on the left side of the display
to turn on the bicycle's electrical circuit. Note that the
battery should already be powered on. A menu appears
on the display; the electrical circuit is switched on.
(A)
On/off button display
(B)
Increase motor support and lighting
(C)
Decrease motor support
Turn bicycle lights on and off
Hold the "
+
" button (B) for a few seconds to turn on the
bicycle lights. The lighting sign appears on the display. Hold
the ''
+
'' button (B) again for a few seconds to turn off the
bicycle lights.
