CE User Manual
LACROS 1.9 EN
18
Folding the bicycle
Folding the pedals
Fold the pedals by pushing the entire pedal toward the bicycle
and then folding it.
Note:
position the pedals so they cannot damage the frame
when the bicycle is folded.
Handlebar clamp
First, turn the plastic locking ring of the handlebar clamp.
Pull the clamp (B) away from the handlebar hinge,
then fold the steering column (A) downward.
Frame clamp (Scamper and Ambling)
Open the middle hinge mount (on the right side of the frame
tube) by raising the plastic locking cap. Now pull the clamp
(A + B) outwards to loosen it. The frame is now open and ready
to be folded.
Note:
do not force the frame clamp to loosen; the system
works with medium force.
Folding the frame (Scamper and Ambling)
Stand on the left of the bicycle, fold the stand and then fold
the front wheel towards the rear wheel such that the wheels
are positioned close together. At the bottom side, a triangular
bracket is mounted on which the bicycle can stand when folded.
Note:
the stand of the S600 (XL) with Bafang mid-drive motor
should be unfolded so that the bicycle can stand on it when
folded.
Locking folded position (Scamper and Ambling)
Secure the bicycle's wheels by pushing them together so
the magnet and metal locking plate (A + B = D) attract each
other (C).
