CE User Manual
LACROS 1.9 EN
39
Attention. Turning these 2 screws is prohibited. It will
lower lever sensitivity
WARNING This bicycle is not designed for competition,
stunting, jumping, or off-road use. Bicycling can be
hazardous. Always wear a safety helmet and follow all
local laws. Max load: read the manual. Please check the
chain tension and turn off the power of the bicycle
before use or pushing the bicycle to avoid accidentally
triggering the booster sensor.
Booster sensor = Magnetic rotation sensor
WARNING Review and follow all safety instructions
contained in the owner's manual. For your safety, never
misuse, abuse of improperly install, maintain, or modify
this part, always keep in mind safety first.
CAUTION: This product is not recommended for
downhill competition, stunt riding or any aggressive off-
road riding.
Warnings
Please read the warnings below carefully.
•
Like all mechanical components, an EPAC, Electrically Power Assisted Cycle (electric bicycle),
is
subject to
wear and tear and high voltages. Different materials and components can react to wear or stress fatigue in
different ways. If the design life of a part is exceeded, it can suddenly fail, potentially injuring the driver. Any
kind of cracking, scratching, or color changes in heavily loaded areas indicate that the service life of the part
has been reached and that it needs to be replaced.
•
For composite components, impact damage may be invisible to the user; the manufacturer will explain the
consequences of impact damage and that in the event of a shock composite components must be returned
to the manufacturer, for inspection or to be destroyed and replaced.
•
Composite components are sensitive to high temperatures (heat radiation) in a closed environment.
Frame number
The frame number of the Gemini is located under the left crank to which the pedal is attached, and the frame
number of the Papillon is located at the bottom of the bicycle at the level of the pedals. For all other models, the
frame number can be found on the front of the bike. It is punched into the frame just above the front fork.
