7 |
P a g e
HOW DO I RESET THE TEMPERATURE/HUMIDITY READINGS?
Your temperature and humidity readings are reset individually.
1.
Press and release the TEMP button to view the reading you wish to reset.
2.
Hold the MINUS button for 5 seconds to reset individual temperature or humidity value to
current temperature, humidity, time and date.
3.
Press and release the LIGHT button to exit.
WHAT IS HEAT INDEX AND DEW POINT TEMPERATURE?
•
Heat Index: A combination of temperature and humidity. Heat Index is recorded when the
temperature is
above 80°F
,
•
Dew Point: Dew point temperature is a measure of atmospheric moisture. It is the
temperature to which air must be cooled in order to reach saturation.
WHERE DOES THE HI | LO READING NEXT TO THE COME FROM?
Your station provides a daily HI | LO temperature reading, as well and the historical records with
time and date stamp listed above. This is shown continually on your station. No button press is
necessary.
•
Standalone station: The daily HI | LO temperature comes from your thermo-hygro sensor
when you operate as a standalone station.
•
Connected to the La Crosse View™ app: When you connect to the La Crosse View™ app.
The daily HI | LO reading will come from the NWS, as a forecasted HI and LO. The words
NWS Forecast will show above the temperature.
TIME: DOES THIS STATION HAVE ATOMIC TIME?
•
Standalone station: When operating as a standalone station, the time needs to be set
manually on this station.
•
Connected to the La Crosse View™ app: When operating as a connected station the time
will update from the National Institutes of Standards and Time (NIST). Your station will sync
with NIST twice per day.
HOW DO I MANUALLY SET THE TIME?
When operating as a standalone station, you can manually adjust your station’s settings:
1. Hold the SET button for 3 seconds to enter settings menu.
2. Press and release the + or - buttons to adjust the flashing values. Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the next item.
