background image

 

NOTE

: When in 12h mode, there is only a 'PM' display, which appears under the word TIME. During the 'AM' hours this area will be blank.  

 

MINUTES:

 The Minutes will flash. Press and release the UP ARROW or DOWN ARROW button until the correct Minutes are displayed. 

Press and release the SET button to confirm and continue. 

 

12/24-HOUR TIME:

 A 12h or 24h will flash. To change between 12h and 24h, press and release the UP ARROW or DOWN ARROW 

button. Press and release the SET button to confirm and continue. 

NOTE

: When in 24-hour time the date will display Day first, then Month. 

 

YEAR

: The Year will flash. Press and release the UP ARROW or DOWN ARROW button to set the correct Year. Press and release the 

SET button to confirm and continue. 

 

MONTH:

 The Month will flash. Press and release the UP ARROW or DOWN ARROW button to set correct Month. Press and release the 

SET button to confirm and continue. 

 

DATE

: The Date will flash. Press and release the UP ARROW or DOWN ARROW button to set the correct Date. Press and release the 

SET button to confirm and continue. 

 

FAHRENHEIT/CELSIUS

: Degrees Fahrenheit or Celsius will flash in the Wind chill, Indoor and Outdoor temperature areas. Press and 

release the UP ARROW or DOWN ARROW button to select between Fahrenheit and Celsius. Press and release the SET button to 
confirm and continue. 

 

WIND SPEED UNIT

: Wind Speed units will flash. Press and release the UP ARROW or DOWN ARROW button to select from 

mph

m/s

knots

Beaufort

, or 

km/h

. Press and release the SET button to confirm and continue. 

 

RAIN UNIT

: Rainfall Inches or Millimeters will flash. Press and release the UP ARROW or DOWN ARROW button to select 

in

 or 

mm

Press and release the SET button to confirm and continue. 

 

PRESSURE UNIT:

 The Air Pressure units (inHg or hPa) will flash. Press the UP ARROW or DOWN ARROW button to select 

inHg

 or 

hPa

The Default setting is inHg. Press and release the SET button to confirm and continue. 

 

RELATIVE PRESSURE SETTING:

 The Relative Air Pressure will flash. Press the UP ARROW or DOWN ARROW button to adjust the 

Relative Air Pressure

.

 Press and release the SET button to confirm and continue. 

NOTE

: Refer to your local weather station for an appropriate setting. It is important that this setting be adjusted for local conditions to 

ensure forecast accuracy.  

 

FORECAST SENSITIVITY:

 The Forecast Sensitivity will flash. The default setting of .09 works well in most areas of the country, however 

in areas with relatively constant pressure this should be set to .06, (within 30 miles of the coast) and in areas with significant pressure 
changes this should be set to 0.12 (within 30 miles of the desert). Press the UP ARROW or DOWN ARROW key to adjust. Press and 
release the SET button to confirm and continue. 

 

STORM ALARM SENSITIVITY: 

The Storm Alarm Sensitivity will flash. The default setting of .15 works well in most areas, however you 

may need to adjust this level up or down depending on your local conditions. Use the UP ARROW or DOWN ARROW button to adjust.  
Press and release the SET button to confirm and continue. 

 

STORM ALARM:

 AON or AOFF will flash. This will turn the Storm Alarm ON or OFF. Use the UP ARROW or DOWN ARROW button to 

toggle the Storm Alarm ON (AON) and OFF (AOFF). Press and release the SET button to confirm and continue. 

 

WIND DIRECTION DISPLAY

: The Dash in the Wind Compass will flash. Use the UP ARROW or DOWN ARROW button to select the 

Wind Direction to be shown in degrees (dash) or letters NNW. Press and release the SET button to confirm and continue. 

 

FACTORY RESET

Res off

 will be displayed. Use the UP ARROW or DOWN ARROW button to select 

on

 

only

 if you wish to Factory 

Reset the Weather Center. If you do not wish to restart the weather center, be sure the Res off is showing and press and release the SET 
button to complete the program menu. 

NOTE

: To Factory Reset the weather center, select 

Res on

 and press the SET button to confirm. The station will begin to count down 

numbers in the date area. When it is complete it will say Done. Then remove the batteries and follow the Restart up procedure. 

LCD Display: 

 

 

 

Display Modes: 

 
Press and release SET button to toggle between the display of Mode 1 or Mode 2: 

 

 

MODE 1:  

 

 

 

 

 

 

MODE 2:          

Wind Speed  

 

 

 

 

 

 

Wind Gust  

Outdoor Temperature 

 

 

 

 

 

Dew Point Temperature  

24 hr. Pressure History Graph 

 

 

 

 

72 hr. Pressure History Graph 

Other buttons provide multiple functions: 

 
UP ARROW: 

Summary of Contents for C86234

Page 1: ...nce in the hole on the bottom of the sensor STEP 3 Insert two AA size batteries into the rain sensor with the correct polarity STEP 4 Insert two C size batteries into the thermo hygro sensor with the correct polarity Allow all sensors to run for two minutes before inserting batteries in the weather station STEP 5 Insert three C size batteries into the wireless display with the correct polarity NOT...

Page 2: ...release the SET button to confirm and continue NOTE Refer to your local weather station for an appropriate setting It is important that this setting be adjusted for local conditions to ensure forecast accuracy FORECAST SENSITIVITY The Forecast Sensitivity will flash The default setting of 09 works well in most areas of the country however in areas with relatively constant pressure this should be s...

Page 3: ...e received at the intended mounting locations before you drill mounting holes The outdoor sensors have a wireless range of 200 feet Keep in mind that the 200 foot range equates to an open air scenario with no obstructions Each obstruction roof walls floors ceilings etc will reduce the range The thermo hygro sensor measures outdoor temperature humidity and collects the data from the wind and the ra...

Page 4: ...her station Connect the USB transceiver to your computer for use with Heavy Weather Pro PC software included in the package on CD ROM You can also download the latest version of the Heavy Weather Pro PC software at www lacrossetechnology com c86234 3 Computer connected weather station with remote monitoring and alerts Connect the USB transceiver to your computer for use with Heavy Weather Pro PC s...

Reviews: