* After the batteries are installed, the LCD will turn on and beep
for 2 seconds. The clock will automatically search the radio
signal. It takes about 3-5 minutes to finish this process.
* If the radio signal is received, the date & time will be set
automatically with radio control signal icon [ ] turns on.
* If the clock fails to receive the time signal, it will be in
Time/Temperature display with the [ ] icon turns off. Then
user can set the time manually.
* Radio-controlled signal will be scheduled to receive every
hour.
Selecting Temperature/Alarm 1/Alarm 2/Dual time Display
* Press MODE will display the ALARM 1 time:
* Press MODE again will display the Alarm 2 time:
* Press MODE again will display the Dual Time:
* Press MODE again will display the Temperature:
