Model: WS-9037U-IT www.lacrossetechnology.com/support
Page | 2
Step 1:
Insert the 2
new
AA batteries (not included) into the
TX29UDTH-IT remote sensor. Observe the correct polarity.
Step 2:
Insert the 3
new
AA” Alkaline batteries (not included) into the
weather station. Observe the correct polarity
Restart:
If there is no remote temperature data after 3 minutes, unplug the AC
adapter and remove batteries from the weather station & remote sensor for 15
minutes. Return to
Step 1
above.
Set Time, Date, Temperature Unit
1. Hold the
SET
button to enter SET mode.
2. Press the
OUT/+
button to adjust the values.
3. Press the
SET
button to confirm adjustments and move to the next
item.
Time setting order:
1. Contrast 1-7
2. Time Zone - 7 time zones
3. DST (Daylight Saving Time On/Off)
4. RCC ON/OFF (WWVB signal)
5. 12/24 hour time format
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit/Celsius
12. InHg or hPa (Pressure unit of measure)
13. Relative pressure
14. Forecast Sensitivity (low for ocean, high for desert)
Press the
SET
button to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
Set Time Alarm
1. Hold the
ALM/DATE
button
to enter alarm
SET mode. Hours and minutes will flash
together.
2. Press the
IN
button to set the hour and the
OUT/+
button to adjust
the minutes.
3. Press the
SNOOZE/CH
button
to confirm & exit.
Activate/Deactivate Time Alarm
This clock has time zones
from GMT 0 to +/-12h
North American time zones:
-4
h
- Atlantic
-5
h
- Eastern (default)
-6
h
- Central
-7
h
- Mountain
-8
h
- Pacific
-9
h
– Alaska
-10
h
-Hawaiian
