TIME SETTING
1.
Press and hold the
SET
button for 2 seconds, hour digits flash. Press the
or the
button to
set the hours.
2. Then
press
the
SET
button again, the minute digits flash. Press the
or the
button to set the minutes.
3. Then
press
the
SET
button again, display shows
:05
and flash. Press the
or the
button to
set snooze duration from 5 minutes to 60 minutes.
4.
Then press the
SET
button again, display shows
00
and flash. Press the
or the
button to
set the time zone:
“-01” GMT +0 (United Kingdom)
“00” GMT +1 (Central Europaen time)
“01” GMT +2 (Eastern Europaen time)
Note:
Time zone can only set when the clock successfully receives a radio signal.
5. Press
the
SET
button
again
to store the settings and return to normal time display. The clock
will return to normal mode in around 10 seconds if no further press of any other buttons.
Note:
The time is displayed in 24-hour display format.
ALARM SETTING
(default alarm setting is 6:00 AM)
1.
Press and hold the
ALM
button until the
AL
icon appears on the display, the hour digits flash.
Press the
or the
button to set the desired alarm hours.
2. Press
the
ALM
button
again, the minute digits flash. Press the
or the
button to set the
desired alarm minutes.
3. Press
the
ALM
button again to store the alarm settings and return to normal time display. The
clock will return to normal mode in around 10 seconds if no further press of any other buttons.
To turn on or off the alarm
Single press the
ALM
button during normal time display to turn on or off the alarm. When the alarm
function is turned on the
AL
icon appears on top of the time digits.
Note:
Alarm duration is 2 minutes.
To use the snooze function
When time reaches the set alarm time, the station will give a beep sound to wake you up. The
AL
icon will flash.
1. Press
SNOOZE
once to stop the alarm temporarily
, AL
icon keeps flashing. The alarm will
beep again after the set snooze duration.
2.
To stop the daily alarm, press any button except the
SNOOZE
button when alarm is beeping.
The alarm will stop and
AL
icon becomes static. The Alarm will beep again same time next day.
DIMMER FUNCTION
Press the
SNOOZE / DIMMER
button to adjust high or low brightness of the LED display.
TROUBLE SHOOTING
In case the station shows false digits, it maybe affected by electrostatic discharge or interferences
from other devices. Press the
RESET
button on the back of the station. The station will be reset to
default setting of time and calendar and it will start to receive radio controlled time signal again.
EN.4
Summary of Contents for WS6825
