OUT/+ key
•
Press shortly to toggle between
MAX/MIN
and current outdoor temperature/humidity data
•
Increase, change, toggle all values in manual set mode
Moon phase icon
Weather tendency
indicator
Time
Calendar or alarm time
Indoor relative
humidity in RH%
Time reception icon
(for DCF time)
Indoor temperature
in ºC/ ºF
Weather forecast icon
Outdoor data signal
reception indicator
Outdoor temperature
in ºC/ ºF
Outdoor relative
humidity in RH%
Comfort indicator icon
Relative air pressure
history bar graph
Relative air pressure
in hPa / inHg
•
Press to set the alarm minute (inside alarm setting mode)
•
Stop the alarm during alarm ringing
•
Stop snooze mode
•
Back-light
on
SNOOZE/CH key
•
Active
snooze
function
during alarm ringing
•
it
the
manual set mode and alarm setting mode
Ex
•
Switch among display of channels (if more than 1 transmitter is used)
•
Back-light
on
LCD SCREEN
The LCD screen is split into
4
sections displaying the information for time/calendar/alarm/moon
phase, indoor data, weather forecast and outdoor data.
MANUAL SETTINGS:
The following manual settings can be changed when pressing the SET key for:
•
LCD contrast setting
•
Time
zone
setting
•
Time reception ON/OFF setting
•
12/24-hour format setting
•
Manual time setting
•
Calendar
setting
•
°C/°F temperature setting
•
hPa / inHg pressure setting
•
Relative air pressure setting
•
Weather forecasting icon sensitivity setting
LCD CONTRAST SETTING:
The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is
LCD
4):
1.
Press and hold the SET key until the digit starts flashing.
2. Use
the
OUT/+
key to view all levels of contrast.
3.
Select the desired LCD contrast. Confirm with the SET key and enter in the
Time Zone
setting
.
TIME ZONE SETTING:
Flashing
The time zone default of the Weather Station is “0”. To set a different time zone:
1.
The current time zone value starts flashing.
2. Use
the
OUT/+
key to set the time zone. The range runs from 0 to -12 and then runs from +12
back to 0 in consecutive 1-hour intervals.
3.
Confirm with the SET key and enter the
Time reception ON/OFF setting
.
TIME RECEPTION ON/OFF SETTING:
In area where reception of the DCF time is not possible, the DCF time reception function can be
turn OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1.
The digit “ON” will start flashing on the LCD.
2. Use
the
OUT/+
key to turn OFF the time reception function.
3.
Confirm with the SET key and enter the
12/24-hour format setting
.
Note:
If the Time Reception function is turn OFF manually, the clock will not attempt any reception
of the DCF time as long as the Time Reception OFF function is activated.
The time reception icon and the “DCF” icon will not be displayed on the LCD.
12/24-HOUR FORMAT SETTING:
The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-Hour)
1. Use
the
OUT/+
key to toggle between “12H” or “24H”.
2.
Confirm with the SET key and enter the
Manual time setting
.
Flashing
Flashing
Last digit flashing
