OPERATING
THE PUMP
1. Powering the pump
2. Assemble the breast pump kit(s) (p.11). Connect the tubing to the outlet on the membrane lid (p.9). If
you’re double pumping, use the tubing port from the extra suction kit. Attach the tubing port to the outlet
and the tubing to the tubing port.
POWER ADAPTOR
Plug the power adapter into the 110-240V
power source. Plug the LACTEA power
cord into the power inlet of the motor block
(p.8). Only use the LACTEA power adaptor.
BATTERY BLOCK (sold separately)
Open the battery block lid and insert 8 AA batteries
in the correct positions. Insert the battery block cord
into the power inlet of the motor block . Turn the
battery block on by pressing the ON switch. Don’t
forget to turn the switch OFF after the pumping
session. If the battery block isn’t going to be in use
for some time, it is better to remove the batteries.
ATTENTION!
Never use power sources unapproved
by the manufacturer.
14
