Lacunza Silver 800/1000 Zero Clearance Box Assembly Instructions
June 12, 2022
8
2.7
Slide the Back Panel into the inside of the Side Panels and Bottom Panel.
2.8
Line up the holes and use 9 x Self Tapping Screws. Use the circle cut-outs in the Back Panel
to pull the sheet towards you, which should help when you are inserting the Self Tapping
Screws. Again, don’t tighten the Self Tapping Screws until the Top Panel has been placed.
2.9
You can now place the Top Panel on the top. All the folds should sit on the outside of the
Side Panels and the Back Panel.