Helpline Number 0845 268 2000
2
1
2
SLACKENING THE HARNESS
FITTING THE CAR SEAT WITH THE 3-POINT LAP
AND DIAGONAL SEAT BELT 9 – 18KG
(APPROXIMATELY 9 MONTHS TO 4 YEARS).
The harness is slackened by pressing
the lever (under the seat cover) on
the front of the seat.
Whilst gripping the two shoulder
straps with your other hand, press
down the lever (1) and pull the
shoulder straps towards you to
loosen the harness (2).
Take care when adjusting the
shoulder straps that you do not trap
the harness adjuster straps as you
press the lever down.
Place the child safety seat on the
vehicles seat ensuring it is firmly
pressed against the car seat
backrest (1).
Thread the car seat belt through the
seat belt route slot in the seats
plastic backrest furthest from the
cars seat belt buckle, and then out
through the other seat belt route slot
and fasten it into the seat belt
buckle (2).
