3
5
4
Check the webbing of the seat belt has not become twisted
or tangled and that the lap belt goes under the armrest and
the diagonal belt under the headrest belt guide then goes
over the red belt guide on the side of the backrest (3).
Place your knee on the base of the safety seat and grip the
top piece of the seat belt webbing. Pull the webbing
upwards to tighten the seat belt (4).
Finish tightening the webbing by pulling the diagonal strap
upwards until there is no slack and the seat is held firmly in
place, attach the red clip to the diagonal belt near to the
buckle (5).
Now you can strap your child into the seat. Make sure the
seat belt has not become twisted. Also check that the cover
is not impeding the movement or fit of the seat belt webbing
in any way. To remove your child seat follow the above
instructions in reverse order.
Red
Clip
