Mounting and operating instructions Electric transporter BLACK LINE
5/54
Introduction
1
INTRODUCTION
1.1
Definition
The product Electric transporter BLACK LINE is a partly completed machine as defined by Eu-
ropean Directive 2006/42/EC, Article 1g and 2g.
1.2
Intended use
The product is intended to be installed in systems, machines or other incomplete machines or
equipment or combined with them.
FIBRO GMBH has no influence on the intended use of the product.
It can only be used within the defined limits.
It must not be put into operation until the required safety of the entire system of which the prod-
uct is a part is ensured, and compliance with the legislation and guidelines of the relevant coun-
try in which the product is being operated has been established and confirmed.
The company operating the product is responsible for protective systems or safety devices cov-
ering the operation of the whole system.
Proper use also includes:
•
Reading these instructions
•
Complying with the safety information they contain
•
Complying with the other applicable documents
•
Observing the maintenance requirements
1.3
Limits of use
Intended use
Intended use of the product:
•
Industrial process transport of solid materials
Operating conditions
The product is designed for industrial use and is not suitable for
private use.
Alignment
The product may only be moved, mounted, stored and operat-
ed horizontally.
The trough slope in the transport direction must not exceed 8°.
A rising trough can reduce the conveying speed by up to 50%.
Service life
The service life of the product is 15000 operating hours.
Temperature range
Operation
Permissable temperature rang for operation:
-20 °C...+100 °C.
ATEX
The product is not suitable for operation in an environments
with explosive atmospheres, gases or radiation.
