FLTL-001-UOM-001, Rev.1.1
12
Locate the top of the leg pipe, which is secured by a small 2” metal pin that is attached to a yellow
string. Remove the 2” metal pin from the leg shaft, loosening the limb as depicted in
Figure 19
below. Keep the 2” metal pin nearby; you will need it for Leg Amputation attachment.
Figure 19. Remove Metal Leg Pin
Insert the Fasciotomy Trainer, orienting it so that the metal leg pipe is located closest to the pelvic
region of the manikin. Make sure the hole on the top of the leg pipe can slide into the pelvic
opening of the manikin with ease. Once the Leg Amputation is in place, slide the top of the leg
pipe directly into the pelvic slot, aligning both holes into place (
Figure 20
).
Figure 20. Leg Pipe Orientation into Pelvic Cavity
