FLTL-001-UOM-001, Rev.1.1
6
2.
Pair each muscle with its corresponding fascial sheath by matching the numbers on
the top right corner of the fascia with numbers on the top of the muscle tubing. The
muscle compartment and fascia numbering are as follows:
a.
Pair deep posterior compartment (#1) with Fascia #1.
b.
Pair superficial posterior compartment (#2) right third with Fascia R.
c.
Pair superficial posterior compartment (#2) middle third with Fascia M.
d.
Pair superficial posterior compartment (#2) left third with Fascia L.
e.
Pair lateral compartments (#3) with Fascia section #3.
f.
Pair anterior compartments (#4) with Fascia section #4.
3.
Place fascia over corresponding muscle by matching the number on the fascia with
the number on the muscle tubing.
a.
To prepare the fascia for installation, the fascia must be removed from its
release liner (
Figure 8
). Lay the fascia up right, so the fascia’s number is
on the right side. Begin to remove the fascia by pulling up while holding
the release liner down.
Figure 8. Removing Fascia from Release Liner
b.
To adhere the fascia to the muscle (
Figure 9
), first correctly align the
muscle over the fascia. Lay the fascia upside down, so the adhesive side
