13
The instructions in this section will help you configure each of your PCs to be able to
communicate with the AP.
The default IP address of the LF-R500 2.4GHz High Power Wireless Outdoor
CPE is
192.168.1.1.
And the default Subnet Mask is
255.255.255.0
. These values
can be seen from the LAN. They can be changed as you desire, as an example we
use the default values for description in this guide.
Connect the local PC to the LAN ports of the AP. There are then two ways to
configure the IP address for your PC
A.
Configure TCP/IP component
1) On the Windows taskbar, click the Start button, and then click Control Panel.
2) Click the Network and Internet Connections icon, and then click on the Network
Connections tab in the appearing window.
3) Right click the icon that showed below, select Properties on the prompt page.
4) In the prompt page that showed below, double click on the
Internet Protocol
(TCP/IP)
.