※
Please read this manual thoroughly before using the product.
※
Please do not hesitate to contact us if you have any questions in the installation or usage.
※
Please safekeeping this manual after reading.
Scope of use
Installation is subject to the requirements of the applicable regulatory
authority, the National Construction Code Volume Three -Plumbing
Code of Australia, associated reference standards as applicable at the
time and AS/NZS 3500. bidet douche seat includes air-gap assessed
and found to comply with the requirements of as 2845.2:2010. no
further backflow prevention is required for this connection to water
supply.
To install, tighten each inlet connection to 10 N.m Max. torque.
Leakage test shall be done before first use. Only qualified plumber for
Installation and maintenance.
Smart Toilet body: PP
Water temperature: 4-35°C
Operating Pressure: 0.07-0.75 Mpa
Only watermark certified components could be used to match with
those Smart Toilet bidet seat.