43
Dolce Vita
|
RATTAN above ground pool
Assembly Instructions
&
Owner’s Manual
12.2 Cleaning
If any hard calcium deposits appear, use a decalcifier to remove any build up. Your pool shop will recommend
certain products.
Always rinse abundantly.
ATTENTION
Avoid the use of thinners during cleaning.
12.3 Water Chemistry Table
Test and maintain correct water balance throughout the season, according to the table.
Free
Chlorine
pH
Total Alkalinity
(ppm)
Calcium Hardness
(ppm)
Cyanuric Acid
(ppm)
Australian
Standard
1 -3
7.2 - 7.8
60 - 200
100 - 400
***
up to 50
Ideal range
1 - 3
7.4
80 - 140
90 - 300
up to 50
To Increase
Add chlorine or increase
equipment output
Add buffer or
soda ash (sodium
carbonate)
Add sodium
bicarbonate
Add calcium chloride
Add cyanuric
acid
To Decrease
Add muriatic acid
Add muriatic acid
or dry acid
Partially drain and refill
pool*
Partially drain
and refill pool*
In Season
Testing
Frequency
Weekly
Weekly
Weekly
Weekly
Weekly
NOTE:
Test all equipment sensors quarterly.
*
Fill pool with water from the mains water supply. Do not use rain water or well water.
**
Do not add salt directly into the skimmer. Do not initiate electrolysis until salt has fully dissolved.
***
Reading is True Calcium Hardness, not Total Hardness.