5
Dolce Vita
|
RATTAN above ground pool
Assembly Instructions
&
Owner’s Manual
Section 2. Assembly on a Concrete Slab
2.1
Concrete Slab
50 cm
Basement
Reinforcement
Concrete cover
water
120 cm
Max water level
WARNING
Ensure reinforcing bars are located in the bottom
of the slab for maximum strength.
2.2
General Requirements
• Consult the local building code for any applicable installation requirements.
• Check with your engineer or private certifier on the optimal requirements for your installation.
• Ensure the concrete slab is rectangular with the same diagonals and that it can support a load of 1300 kg by
square meter from water weight.
• Concrete slab must be secured in case of geological instability.
• Slab surface should be smoothed like plaster with no sharp edges.
• Tolerance gradient of the perimeter of slab = ± 1 cm.