Lügler
N T
R
O
D U
C
T
O N
1.3
Application
The stair-sanding, edge-sanding and corner-sanding
machine ELAN is suitable for the dry sanding of wooden
floors, cork floors and wooden stairs in the professional
and rental business sectors.
Any other form of use without the approval of the manufacturer is not
permiUed.
No wet processing operations!
1.4
Safety instructions
Please read the danger warnings carefully and also
instruct your employees or colleagues accordingly. Other
wise, these persons could be exposed to danger or be
injured.
When the sanding disk is touching the floor, the machine
must not be switched on in order to prevent injuries.
Use the tools, accessories and spare parts that have
been made by
LÄGLER
for the ELAN only. Otherwise, this
could result in damage to the machine, the processed
object or for the operator.
Make sure the dust bag is properly fastened in order to
prevent unnecessary and unhealthy dust emissions for
the operator and the environment.
Incorrect transport operations will result in machine
damage.
To prevent any damage due to fire or explosions, the dust
bag must be emptied after the work has been completed
and the contents then be stored outdoors.
The power supply cable must be kept out of the work
zone in order to prevent any damage to mechanical or
electrical equipment.
To exclude the possibility of the machine being started
unintentionally, the power supply must be interrupted by
removing the power supply plug from the socket after the
machine has been switched off.
For proper protection against fault currents, a DI-safety
plug (art. no.
000.01.65.010)
should be used.
In case of correct machine operation, the mandatory dust
emission values will not be exceeded. When emptying
the dust bag, it is advisable to wear a respiratory
protective mask P3 (art. no.
000.01.20.010).
