FLIP
®
01.12.2012
English / Englisch
WARNING!
RISK OF INJURY and RISK OF PROPERTY DAMAGE:
In the event of transport in an automobile or similar machine,
all parts must be secured against sliding!
RISK OF FIRE from the formation of sparks while sanding:
Always transport and store the machine without the dust bag!
Store the used dust bag in a non-combustible container!
NOTE!
You can use parts of the transport packing to transport or store
the machine!
If the machine must be stored for a longer period of time, take the
measures necessary to ensure dry and frost-free storage with
minimum temperature fluctuations.
In order for the FLIP
®
to need less space for transport or storage,
proceed as follows:
1
Pull out the stop bolt in the fan house (Fig. 28, 1.).
2
At the same time, turn the pipe socket until the dust bag is
positioned over the attachment (Fig. 28, 2.) and the stop bolt
noticeably snaps into place in the pipe socket when released
(Fig. 28, 3.).
CAUTION!
RISK OF INJURY and RISK OF PROPERTY DAMAGE:
The stop bolt must always snap into place in the pipe socket!
You can easily carry the machine using the pipe socket (Fig. 29).
Transport and storage
TRANSPORT AND STORAGE
Fig. 29
Carry the FLIP
®
by the pipe socket.
Fig. 28
Pull out the stop bolt (1.) and simultaneously turn
the pipe socket (2.). Then release the stop bolt
(3.). It must snap into place in the pipe socket!
6
23
Summary of Contents for Flip
