FLIP
®
01.12.2012
English / Englisch
9
CAUSES OF FAULTS
The machine vibrates intensely and runs noisily
•
The sanding medium does not have the proper tension. The
tension must be corrected (
Section 5.2, Replacing the
sanding medium
).
•
The sanding medium is damaged or incorrect and must be
replaced (
S
ection 5.2, Replacing the sanding medium
).
•
The V-belt is dirty, damaged or worn-out and must be replaced
(
Section 7.3, Replacing the V-belt
).
•
A pulley is dirty or worn-out and must be cleaned or replaced
(
Section 7.4, Replacing the complete sanding plate
and
Section 7.5, Replacing the motor pulley
).
•
There are clogged materials and deposits in the machine that
must be removed.
THE MACHINE RUNS BUT CREATES A GREAT DEAL OF DUST
•
The dust bag is more than one third full and must be emptied
(
Section 5.3, Emptying the dust bag
).
•
The dust bag is not correctly attached or is damaged and
must be replaced (
Section 4.1, Preparing the machine
).
•
When mounting the attachment, the belt tightening plate
was pinched between the attachment and the fan housing.
The attachment must be properly installed (
Section 7.3.2,
Installing the V-belt
).
•
The dust suction system is clogged up and must be cleaned.
•
More than one sanding disc is mounted. Only install one sand-
ing disc (
Section 5.2, Replacing the sanding medium
).
•
The machine setting angle is too steep. The guide rollers must
be properly adjusted (
Section 7.8, Adjusting the guide
rollers
).
•
The machine is not being moved in clockwise, circular motions
while sanding.
45
Summary of Contents for Flip
