FLIP
®
01.01.2019
English / Englisch
HAZARD WARNINGS AND SAFETY INSTRUCTIONS
2
RISK OF FIRE from the overheating of the cables.
•
Only cables with
two
wires and wire cross-sections of
at
least
1.5 mm² (0.0023 sq.in.) may be used as
motor cables
!
•
Only cables with
two
or
three
wires and wire cross-sections
of
at least
1.5 mm² (0.0023 sq.in.) may be used as
power
cables
!
•
The
maximum
cable length in order to connect the machine
to the mains supply must not exceed 20 m (790”)!
HEALTH RISK caused by dust:
•
Make sure that the dust bag is properly fastened to the
machine!
•
Do not use damaged, washed or repaired dust bags!
•
Do not work with an overfilled dust bag (
Section 5.3,
Emptying the dust bag
)!
•
If the machine is operated
correctly
, the mandatory dust
emission values will not be exceeded! When emptying the
dust bag, it is advisable to wear a respiratory protective mask
(at least filter class P2)!
•
Always wear a respiratory protective mask (at least filter
class P2) when executing works which might create dust,
e.g. cleaning of the machine!
WARNING!
10