HUMMEL
®
01.12.2012
English / Englisch
WORKING WITH THE HUMMEL
®
7
Position the sanding belt so that it evenly covers the sanding
drum (Fig. 31, A).
WARNING!
RISK OF FIRE from the formation of sparks while sanding:
Position B of the sanding belt in Fig. 31 provoke sparking during
sanding! Avoid this without fail!
8
To tension the sanding belt, press the operating lever of the
drive unit downwards (Fig. 32).
Otherwise, damage or injury
can occur!
9
Connect the machine to the mains supply (
Section 4.2,
Connecting the power cable
).
CAUTION!
RISK OF INJURY and RISK OF PROPERTY DAMAGE from rotating
parts of the machine:
•
Always tension the sanding belt before switch on the
machine (Fig. 32)!
•
Always lift the sanding drum off the floor before switch on
the machine (Fig. 26)!
10
Before sanding, the precise tracking of the sanding belt
must be checked! Adjusted it if necessary (
Section 7.3,
Checking and setting the sanding belt tracking
)!
CAUTION!
RISK OF INJURY and RISK OF PROPERTY DAMAGE from rotating
parts of the machine:
•
Never reach into the area of the sanding belt while it is
running!
•
During the test run, ensure that no objects randomly
positioned in the vicinity can be picked up by the sanding
belt and no other persons are in the danger area!
5
Fig. 32
Tension the sanding belt by lowering the operating
lever.
Otherwise, damage or injury can occur!
Fig. 31
Position the sanding belt so that it evenly covers
the sanding drum (
A). Avoid position B without
fail (risk of fire)!
21
Summary of Contents for HUMMEL
