HUMMEL
®
01.12.2012
English / Englisch
TRANSPORT AND STORAGE
Fig. 44
Remove the suction V-belt.
Fig. 45
Allow the drive V-belt to run off the lower pulley.
If necessary, use the box wrench (see tool kit) to
help you. Turn the pulley
exclusively clockwise
in order not to loosen the nut!
6
Fig. 46
Remove the motor from the machine housing.
CAUTION!
RISK OF INJURY:
During dismantling and mounting the V-belts, take care of your
fingers
danger of crushing!
7
Turn the motor pulley and allow the suction V-belt to run off
the motor pulley (Fig. 44).
8
Turn the lower pulley and allow the drive belt to run off the
lower pulley (Fig. 45).
If necessary, use the box wrench (see tool kit) to turn the
lower pulley
exclusively clockwise
!
ATTENTION!
Only turn the nut with the box wrench at the lower pulley
clockwise, as otherwise the nut will work loose (left-hand
thread)!
9
Remove the motor from the machine housing (Fig. 46) and
secure it during transport against slipping and damage!
10
Press the lowering lever at the handle downwards (Fig. 47)
to lower the sanding drum onto the floor.
11
Open the wing screw at the lower rod (Fig. 48, 1.) and the wing
nut at the machine housing (Fig. 48, 2.)
12
Pull the guide tube out of the machine housing (Fig. 48, 3.).
Fig. 47
Press the lowering lever at the handle downwards
to lower the sanding drum onto the floor.
26
Summary of Contents for HUMMEL
