SINGLE 01.02.2013
English / Englisch
GETTING STARTED
For safety reasons, the machine CANNOT be switched on:
•
If the guide tube is in a VERTICAL POSITION, since this makes
the machine very difficult to control (Fig. 11).
•
UNLESS both start levers on the handle are pulled AT THE
SAME TIME. Holding the machine steady with both hands ena-
bles you to control the machine properly when it is switched
on, despite the motor starting torque.
Professional tip:
To start up the machine with almost no jerking movement, we
recommend lifting the machine VERY SLIGHTLY at the handle
immediately after you switch it on.
Before switching on the machine, ensure that:
•
the sanding plate is placed flat on the floor and
•
the guide tube is not in a vertical position and
•
the dust extraction socket is closed either with its cap or with
a vacuum cleaner hose!
When you have made these checks, the SINGLE can be started!
Pull both the start levers AT THE SAME TIME and hold the handle
tight with both hands (Fig. 12). The machine will start up.
Never allow the machine to run unattended, otherwise damage
or injury can occur!
Always pull the mains plug out of the socket once you have
finished working.
3.4 SWITCHING OFF THE MACHINE
To switch off the machine, release both the start levers but keep a
tight hold on the machine with both hands on the handle, until the
sanding plate has come to a complete standstill.
Never allow the machine to run unattended and always pull the
mains plug out of the socket once you have finished working.
Fig. 8
Insert the extension cable in the upper cable
holder on the guide tube.
Fig. 9
Never switch on the machine unless there is a
sanding plate mounted!
Fig. 10
Never switch on the machine unless it is in the
working position and the sanding plate is placed
flat on the floor!
Fig. 11
If the guide tube is in a vertical position, the
machine CANNOT be switched on!
3
10
Summary of Contents for SINGLE
