SINGLE 01.02.2013
English / Englisch
WORKING WITH THE SINGLE
4.4 ADJUSTING AND REPLACING THE CABLE
HOLDER
4.4.1 ADJUSTING THE CABLE HOLDER
The cable holder positions can be adjusted individually along the
groove on the guide tube of the machine.
1
Using a hexagonal socket wrench, slacken the screw in the
middle of the cable holder just enough to let you slide the
cable holder along the groove with the sliding block (Fig. 20).
2
Slide the cable holder into the position you want it in and
tighten the screw again. As you do so, the sliding block turns
so that the cable holder is clamped in place (Fig. 20).
4.4.2 REPLACING THE CABLE HOLDER
1
To remove or replace a cable holder, slacken the screw in the
middle of the cable holder.
Do not
remove the screw entirely
from the sliding block! You can now remove the cable holder
together with the sliding block (Fig. 21).
2
To mount a cable holder, push the screw with its washer into
the hole on the cable holder and on the other side, screw the
sliding block loosely onto the screw.
3
Push the sliding block into the groove on the guide tube and
tighten the screw. As you do so, the sliding block turns so
that the cable holder is clamped in place (Fig. 22).
4.5 ATTACHING AN EXTERNAL VACUUM CLEANER
We recommend attaching a FESTOOL mobile extractor CTM44E230V
as an external vacuum cleaner. This guarantees that the best pos-
sible dust removal results are achieved. The description below
applies only for vacuum cleaners of the type specified here.
NOTE:
Please comply with the safety specifications made by the vacuum
cleaner manufacturer and read through the operating instructions
for the vacuum cleaner carefully!
1
Plug the mains plug of the SINGLE into the extension cable.
2
Plug the extension cable plug into the socket on the vacuum
cleaner (Fig. 23).
Fig. 20
Release the screw, move the cable holder with the
sliding block and then tighten the screw again.
Fig. 21
Release the screw. Do NOT remove it completely,
and remove the cable holder WITH the sliding
block.
Fig. 22
Insert the sliding block in the groove on the guide
tube and tighten the screw.
Fig. 23
Push the extension cable plug into the socket on
the vacuum cleaner.
4
14
Summary of Contents for SINGLE
