SINGLE 01.02.2013
English / Englisch
MAINTENANCE AND REPLACEMENT OF WEARING PARTS
Maintenance and replacement
of wearing parts
Periodically, but at the latest when you notice that damage has oc-
curred, a variety of maintenance procedures have to be performed.
For this work, always use original spare parts manufactured by
LÄGLER
®
. Work in a clean, well lit location and proceed in accord-
ance with these instructions.
For safety reasons, more extensive maintenance work, especially
on the electrical equipment, must be carried out by a qualified
specialist.
6.1 CLEANING AND CARE INSTRUCTIONS
Never use cleaning agents containing solvents.
Before starting work, you should perform the following care pro-
cedure in order to ensure that the machine is in full working order
and produces the customary high-quality sanding finish:
•
Clean the machine’s wheels.
•
Clean all dust or other residues off the moving parts at the
base of the guide tube.
•
Carry out a visual inspection of the electrical equipment
(extension cable, plug, couplings).
6.2 REPLACING THE PLATE MOUNTING AND THE
SHOCK ABSORBER
Always use original LÄGLER
®
plate mountings and shock absorbers
(For part nos. please see
Section 11, Spare parts
).
1
Switch off the machine and pull the extension cable out of
the socket.
2
Pull the adjusting lever on the handle towards you to release
the lock of the guide tube, and push the guide tube into and
past the vertical position until it reaches the mechanical stop
(Fig. 31).
Fig. 31
Pull the adjusting lever to release the lock and
push the guide tube up until it reaches the me-
chanical stop.
6
17
Summary of Contents for SINGLE
